Kp Off Function - Uniwell HX-4500 Operation Manual

Operation steps and how to release (print) items
48. Sign on a clerk.
49. Register items with KP, assign table/bill if necessary, and store or close by media.
Items are usually printed on KP at once, but if KP Hold mode is ON, they are held without being printed.
50. Repeat the operation 2 until registering all customers' orders.
51. Perform KP Release operation by executing one of the following operations.
52. Table or Bill number entry by Ten-key – [KP RELEASE]
53. [KP RELEASE] (Ten-key pad is displayed) – Table or Bill number entry by Ten-key – [Enter]
54. [KP RELEASE] (Ten-key pad is displayed) – [Enter] (List of held transactions are displayed)
Check the transaction(s) to be released, and press [OK] button.
Notes:
When "KP Holding time" is programmed, transactions which have passed the preset minutes after track store or media close
will be automatically released and printed.
Regarding the transactions with the same table number, they are printed on one KP docket at the timing of KP release.

4-3. KP OFF function

In some sites, there are periods of the day when they do not want to use a kitchen printer and do not need to print the orders,
eg. The dishes or snacks are already prepared and are in the bar.
For that purpose, it is now possible to disable/enable specific kitchen printers in Sales mode. In "KP OFF" condition, KP
data for such KPs can not be printed at a later time because such data will not be stored in the POS.
In addition, "KP Hold" data can be deleted by 1st Z Auto Full/Full Transaction Report by setting. Until deletion, such KP
data can be printed by KP Release as before.
Program
Display > Screen Layout > KP OFF
Clerk > Security Level > Sales Mode > KP OFF
Print > KP File > System Option > KP hold data reset by 1st Z transaction report
Sample setting
KP File 1: Enabled, and Virtual printer 1 is assigned
KP File 2: Enabled, and Virtual printer 2 is assigned
211