Scan A Bar Code; Scanner Settings - Honeywell Dolphin CT50 User Manual

Scan a Bar Code

ScanDemoW10 demonstrates the functionality of the scanner in the CT50 and is
not intended as a functional business solution. Detailed information on how to cre-
ate custom applications for the CT50 is provided in the Software Development Kit
(SDK) section of the Dolphin CT50 Software tab on www.honeywellaidc.com.
The scanner has an aiming beam to help you correctly frame bar codes. It also sup-
ports omni-directional (360°) scanning to make it easier for you to scan bar codes.
Note: Before you start scanning bar codes, you can use the Settings app within
ScanDemoW10 to enable only the bar code symbologies that you need.
1. Tap All Apps > ScanDemoW10.
2. Point the scanner window at the bar code and hold the computer steady a few
3. Press one of the Scan buttons. The illumination frame appears.
Make sure the entire bar code is inside of the frame. When the scanner successfully
reads a bar code, you hear a high beep and the Good Read LED turns on briefly.
4. Release the Scan button.

Scanner Settings

You can set several scanner settings from the ScanDemo application that
determine scanning options and profile settings. Settings include these sections:
•
•
•
Swipe the screen left or right to access the Settings menu.
26
inches from the label.
Scan
Symbology
Profiles
Dolphin CT50 with Windows 10 IoT User Guide