Codan Cascade Operation Manual page 2

ii
DOCUMENT CONTROL
DOCUMENT REVISION
DEFINITION
NOTE
Cascade System Modules Operation Guide
OG-CASC-SYS-MOD-1-0-0P
This document has been produced, verified and controlled in accordance
with Quality Management System requirements.
Please report any errors or problems.
Documentation uses a three-level revision system. Each element of
the revision number signifies the scope of change as described in the
diagram below.
The result of a major change to
product function, process or requirements.
The result of a minor change to
product, process or requirements.
Editorial Revisions:
The result of typing corrections or
changes in formatting, grammar or wording.
Three-level revision numbers start at 1-0-0 for the first release. The
appropriate element of the revision number is incremented by 1 for each
subsequent revision, causing any digits to the right to be reset to 0.
For example:
If the current revision = 2-1-1 Then the next major revision = 3-0-0
If the current revision = 4-3-1 Then the next minor revision = 4-4-0
If the current revision = 3-2-2 Then the next editorial revision = 3-2-3
Document revision history is provided at the back of the document.
The user's authority to operate this equipment could be revoked through
any changes or modifications not expressly approved by Codan Limited.
The design of this equipment is subject to change due to continuous
development. This equipment may incorporate minor changes in detail
from the information contained in this manual.
Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
1 - 0 - 0
Major Revisions:
Minor Revisions: