Advertisement
3
This water treatment system must be properly installed and located in accordance with the
Installation Instructions before it is used or the warranty will be void.
Do not install or store where it will be
exposed to temperatures below freezing or
exposed to any type of weather. Water
freezing in the system will break it. Do not
attempt to treat water over 100°F.
Do not install in direct sunlight. Exces-
sive sun or heat may cause distortion or
other damage to non-metallic parts.
Maximum allowable inlet water pressure is
Carbon Filter
Size
Carbon Total
Connections
RO System
Output
Recovery Rate
Connections
Filters
Storage Tank
Material
Bladder Pressure 8-10 PSI (Tank Empty)
Connections
Sizes
Post Filter
Type
Connections
Proper Installation
Specifications
8" Dia x 35" H
1 Cubic Foot
3/8" Quick Connect
300 GPD
50%
3/8" Tubing
Sediment, Carbon and Re-mineralization Filter
Fiberglass
3/8" QC
30 Gal (16" Dia x 44" H) 40 Gal (16" Dia x 56.75" H) 80 Gal (24.25" Dia x
55.5" H)
Carbon with Quantum Disinfection Media
3/8" QC
125 psi. If daytime pressure is over 80 psi,
night time pressure may exceed the maxi-
mum. Use a pressure reducing valve to
reduce the pressure.
WARNING: Discard all unused parts
and packaging material after installation.
Small parts remaining after the installation
could be a choke hazard.
Advertisement
