5. When assembly is complete, check the
steering stem by turning it from lock to
lock. If there is any binding or looseness,
readjust the tightness of the steering
stem.
Tightening torque:
Steering stem nut:
65 Nm (6.5 m 'kg, 47 ft 'Ib)
Cap bolt:
50 Nm (5.0 m 'kg, 36 ft 'Ib)
Handle holder bolt:
34 Nm (3.4 m' kg, 24.5 ft 'Ib)
5-15
DRIVE CHAIN AND SPROCKETS
Adjustment
Refer to "Drive chain adjustment" on page
2-11.
Sprocket inspection
1. Check sprocket wear. Replace if tooth
width has decreased as shown.
1. 1/4 tooth
2. Correct
3. Roller
4. Sprocket
2.
Replace if tooth wear shows a pattern
such as that in the illustration or similar
wear.