Installing The Front Fork - Yamaha YT175J 1982 Service Manual

Always use a new stopper ring (Spring
wire circlip).
Installing the front fork
1. Insert the fork tube into the under
bracket; push the fork into the bracket
until it stops. Install the stopper ring in
the fork tube, and reinstall the rubber
cap.
1. Be sure the stopper ring is properly
seated in the groove in the fork
tube.
2.
When installing the fork, make sure
the breather pipe is properly con-
nected and routed.
UNDER BRACKET
BREATHER PIPE
2.
Install the pinch bolts and tighten them
to specification.
Tightening torque:
54 Nm (5.4 m ·kg, 39 ft ·Ib)
3. Reinstall the front wheel.
Refer to "Installing the front wheel" on
page 5-2.
5-12