Yamaha YT175J 1982 Service Manual page 17

b. Loosen the brake pedal cable lock nuts,
adjust the brake caliper lever position so
that the cable length from the frame to
the cable end is 62 mm (2.4 in), as il-
lustrated. After adjustment, tighten the
lock nuts.
1. Brake caliper lever
2. Locknut
3. Brake pedal cable
4. Rear brake cable
c. Loosen the caliper lock nut, and adjust
the play of the brake pedal to 6 - 10 mm
(0.24 - 0.39 in) by turning the adjusting
bolt. Then tighten the adjusting bolt lock
nut.
1. Adjusting bolt
2. Lock nut
Tightening torque:
15 Nm (1.5 m 'kg, 11 ft 'Ib)
3. Rear brake lever
WARNING:
Never adjust the brake lever without first
adjusting the brake caliper and brake
pedal.
2-10
a. Loosen the brake cable lock nuts and
turn the adjuster so that the rear brake
cable and brake caliper lever have no
play at all. After adjusting, tighten the
lock nuts.
Omm
~
1. Brake caliper lever
2. Lock nut
3. Rear brake cable
b. Turn the adjuster so that the brake lever
has a play of 9 - 15 mm (0.35 - 0.59 in)
at its end. Next, tighten the lock nut.
1. Adjuster
2. Locknut