Removal And Disassembly - Yamaha YT175J 1982 Service Manual

Removal and disassembly
1. Raise the front wheel by placing a
suitable stand under the footrest.
2. Remove the front wheel assembly. Refer
to
I I
Front wheel removal" on page 5-1 .
3. Loosen the pinch bolts and remove the
brake cable holder securing bolt.
5-10
4. Remove the rubber cap and stopper ring
(Spring wire circlip) from the top of the
each fork.
5. ThE' spring seat and fork spring are re-
tained by a stopper ring (Spring wire
circlip). It is necessary to depress the
spring seat and fork spring to remove
the stopper ring. Remove the stopper
ring by carefully prying out one end with
a small screwdriver.
6. Remove the fork spring and drain the oil
completely.
7. Remove the cylinder securing bolt from
the bottom of the fork assembly. Hold
the inner tube with the front fork
cylinder holder. Pull the inner fork tube
from the outer fork tune.
1. Cylinder securing bolt