Starter - Yamaha YT175J 1982 Service Manual

Starter
DRIVE PLATE
1. Install the starter spring in the starter
case.
NOTE: _ _ _ _ _ _ _ _ _ _ _ _
1 . It is necessary to wind the spring to a
small size before installing it in the
starter case.
2. Be careful not to install the spring in the
wrong way.
3. Hook the loop on the outer end of the
spring onto the spring hook in the starter
case. Then thoroughly grease the spr-
ing.
3-10
STARTER ROPE
2. Insert the rope end to the hole in the
shave drum and knot on the rope end.
Wind the rope around the shave drum in
the direction of the arrow and hook the
rope in the cut on the shave drum
periphery 370 mm (14.6 in) from the end
of the rope.