Technical Data; Compressed Air Quality - SPX FLOW APV DELTA UF3(A) Instruction Manual

APV
APV_UF3-UFR3_UK-7_082017.indd
9
9.

Technical Data

9.1. General data
- Product-wetted parts:
- Other parts:
- Seals: standard design
- option:
- max. line pressure
- max. operating temperature:
- short-term load:
- air connection (for hose):
- control pressure for seat lift actuator:
Depending on the size of the spring cylinder, the response
pressure can be adjusted variably or up to max. 10 bar. (or
according to drawing data)
- The minimum response pressure can be > 0 bar depending on the
valve mounting position and the friction of the shaft seal.
Use dry and clean control air only!
9.2.

Compressed air quality

- Compressed air quality:
- Content of solid particles: quality class 3,
- Content of water:
- Content of oil:
The oil applied must be compatible with Polyurethane elastomer
materials.
1.4404 (DIN EN 10088)
1.4301 (DIN EN 10088)
EPDM
HNBR, VMQ, FPM
10 bar or acc. to
drawing data
135°C EPDM, HNBR
*FPM, *VMQ
140°C EPDM,
HNBR *FPM, *VMQ
*(no steam)
6 x 1mm
10 bar max. / 6 bar min.
quality class according to ISO 8573-1
max. number of particles per m³
10000 of 0,5 μm < d ≤ 1,0 μm
500 of 1,0 μm < d ≤ 5,0 μm
quality class 3,
max. dew point temperature - 20 °C
For installations at lower temperatures
or at higher altitudes, additional
measures must be considered to reduce
the pressure dew point accordingly.
quality class 1,
max. 0,01 mg/m³
DELTA UF3 (A) / UFR3 (A)
Instruction Manual: UK-7
UK
Relief Valve