Telnet Interface; Http Web Server Interface - Comtech EF Data CDD-562AL Installation And Operation Manual

CDD-562AL/564A/L Multi-Channel Demodulator
Ethernet-based Remote Product Management
7.3.8.6.1 Unit Monitor
This section reports serial number, software revision, model number and temperature. Any alarms that
have been raised for the unit are available also.
7.3.8.6.2 Rx Monitor
This section reports the demodulator's bit error rate (BER), buffer fill state, frequency offset, receive
signal level and Eb/No value. Alarms that have been raised on a specific demodulator are reported also.
7.3.8.6.3 LNB Monitor
This section reports LNB unit status, including LNB current, LNB voltage and any alarms.
7.4

Telnet Interface

The CDD-56xA/L has a Telnet interface for equipment M&C via the Command Line Interface (CLI)
application. See Chapter 9. TELNET and CLI Operation.
7.5

HTTP Web Server Interface

A user-supplied web browser allows you to fully monitor and control (M&C) the CDD-56xA/L from its
HTTP Web Server Interface.
The embedded web application works best with Microsoft's Internet Explorer Version 6.0 or higher.
For more about using the HTTP Interface, see Chapter 10. HTTP Web Server Interface.
7–9
Revision 0
MN-CDD562AL564AL