Figure C-5. Cdd-564A/L Router Mode – Assign Ip Addresses - Comtech EF Data CDD-562AL Installation And Operation Manual

CDD-562AL/56xA/L Multi-Channel Demodulator
Dedicated Management Port
C.4.2.1 Steps to set the Traffic IP Address(es)
See Figure C-5:
1. From the CLI Main Menu, type
E
2. Type to go to the Ethernet Configuration menu
3. On the Ethernet Configuration menu, type
4. On the Ethernet Configuration menu, type M or B to set the Subnet Prefixes. Make sure the Management and
Traffic IP Addresses are not in the same subnet.
5. Type S to save the changes.
1
2
3 & 4
Figure C-5. CDD-564A/L Router Mode – Assign IP Addresses
I
to go to the Interface Configuration menu
I
or L to set the Management or Traffic IP Addresses, respectively.
C–5
Revision 0
MN-CDD562AL56xAL