Figure 1-9. Cdd-564Al Rear Panel View - Comtech EF Data CDD-562AL Installation And Operation Manual

CDD-562AL/564A/L Multi-Channel Demodulator
Introduction
1.3.5.2 Rear Panel
External cables are attached to connectors on the rear panel of the unit.
See also: Chapter 3. Rear Panel Connectors and Pinouts.
CAUTION
The European EMC Directive (EN55022, EN50082-1) requires using properly shielded
cables for DATA I/O. These cables must be double-shielded from end-to-end, ensuring
a continuous ground shield.
CDD-564AL (L-Band)
Name Type
AC
DC (Optional)
Ground #10-32 stud
Rx 1 Type N female
Rx 2 Type N female
Rx 3 Type N female
Rx 4 Type N female
Factory Test 9-pin Type D male
Traffic RJ-45 female
M&C RJ-45 female
Console RJ-11 female

Figure 1-9. CDD-564AL Rear Panel View

Function
Chassis power
Common Chassis Ground
L-Band Input
Remote Interface (EIA-232) for Factory Test
Ethernet Traffic
M&C Port
Async Serial Console Port
1–10
Revision 0
MN-CDD562AL/564AL