Cdd-56Xa/L Cable Connections - Comtech EF Data CDD-562AL Installation And Operation Manual

CDD-562AL/564A/L Multi-Channel Demodulator
Rear Panel Connections
3.2

CDD-56xA/L Cable Connections

Table 3-1. Rear Panel External Cable Connections
Service Type
Section
/Function
Rx IF
3.2.1
/RF Input
Service Type
Section
/Function
Terrestrial Data
/Ethernet Traffic and M&C
3.2.2
Dedicated Management Port
Utility
/Remote Interface for Factory
Test
3.2.3
Utility
/Async Serial Console Port
CAUTION
The European EMC Directive (EN55022, EN50082-1) requires using properly shielded cables
for DATA I/O. These cables must be double-shielded from end-to-end, ensuring a continuous
ground shield.
CDD-562AL
Connector
Name
(L-Band)
Type N
Rx 1
female
Type N
Rx 2
female
Rx 3 N/A
Rx 4 N/A
Connector
Name
10/100 Ethernet RJ-45 female
10/100 Ethernet RJ-45 female
9-pin Type D male
Remote Control
or
Factory Test
NOT FOR CUSTOMER USE
Console RJ-11 female
3–2
MN-CDD562AL564AL
CDD-564AL
(L-Band)
Type N
female
Type N
female
Type N
female
Type N
female
Type for all CDD-56xA/L units
Revision 0
CDD-564A
(IF Band)
Type BNC
female
Type BNC
female
Type BNC
female
Type BNC
female