C10 Automatic Restore Default Setting - SZKTDZ KT-LCD8S User Manual

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
The password setting is done sequentially from left to right, press
confirm after each setting and enter next setting. Password setting range is 000-999, press
button (UP) or
Please note：If you forget your password, the parameters can only be copied (see
parameter copy) by data source meter prier to be decoded.
After finishing C9 parameter setting, press
value and then press
○
C10 Automatically Restore Factory Setting
Enter C10 parameter setting interface after C9 parameter setting is finished, press
button (SW), C10 parameter column flashes.
Password Setting Interface
button (DOWN) for selection.
button (DOWN) to enter C10 parameter setting interface.
- 36 -
button (SW) to save the current
button to