Automatic Prompt Interface; Error Code Display; Motor Operating Temperature Alarm - SZKTDZ KT-LCD8S User Manual

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
Under the status of data flashing, if there were no operations on the data within 5
seconds, the meter will automatically return to display1 after 5 seconds, and the
original record content will be saved.
○
Automatically Prompt Interface
Error Code Display：
When the electronic control system of the electric vehicle fails, and the meter will
automatically display (flicker) fault code. You can't exit the fault code display only the
fault is removed.
Error Code & Definition Table：
Motor position sensor fault!
THROTTLE fault!
Motor operating temperature alarm：
Under any interface, when the motor operating temperature exceeds the warning value,
the motor operating temperature display flashes to alarm, meanwhile, the controller will
offer the appropriate protection to motor.
Error Code Definition
Failure of electronic control system
Malfunction of the operation
- 17 -