P5 Power Monitoring Setting - SZKTDZ KT-LCD8S User Manual

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
P4 is throttle startup setting, when P4 setting is 1, indicating the throttle is under
"non-zero startup" mode, namely, the throttle can be effective only after startup the foot
power assist. When P4 setting is 0, indicating the throttle is under "zero startup" mode,
the motor can be startup by the throttle directly. P4 setting range is 0 or 1, press
button (UP) or
same to that of P2.
After finishing P4 parameter setting, press
values, then press
○

P5 Power Monitoring Setting

Enter P5 parameter setting interface after P4 parameter setting is finished,
P5 parameter column flashes.
button,
P4 parameter setting interface
button (DOWN) for selection. P4 parameter setting method is the
button (DOWN) to enter P5 parameter setting interface.
button (SW) to save the current set
- 24 -
press