C11 Attribute Selection Setting - SZKTDZ KT-LCD8S User Manual

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
C10 is automatic restore factory settings, the default is N, and the setting can be N, or
Y, press button (UP) or
C10 parameter definition table：
C10 value
When the meter is needed to restore default setting, C10 selects Y, hold
long for about 2 seconds, all parameters restore default settings and exit setting
environment, and then return to the display1.
After finishing C10 parameter setting, press
value and then press
○
C11 Meter Attribute Selection Setting
Enter C11 parameter setting interface after C10 parameter setting is finished, press
button (SW), C11 parameter column flashes.
C10 parameter setting interface
button (DOWN) for selection.
N
Y
button (DOWN) to enter C11 parameter setting interface.
Restore default setting
Function off
Function on
button (SW) to save the current
- 37 -
button