P Parameter Setting; P1 Motor Characteristic Parameter Setting; P2 Wheel Speed Pulse Signal Setting - SZKTDZ KT-LCD8S User Manual

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
parameters will be saved.

P Parameter Setting

After finishing metric/imperial unit settings, the speed and mileage units stop flashing.
Press button (DOWN) to enter P Parameters Setting.
○

P1 Motor Characteristic Parameter Setting

P1 is motor characteristic parameter setting, P1 = motor gear reduction ratio× number
of motor magnet pieces, just rounding if there's any decimal.
After entering P parameter setting environment, the first is to set P1parameter, P1
parameter column flashes. P1 setting ranges between1-255, press
button (DOWN) for selection.
Under P1 parameter setting interface, if there's no button operation on the
meter for more than 1 minute, and then the meter will automatically return to display
1, and the original set parameter will be saved.
After finishing P1 parameter setting, press
and press button (DOWN) to enter P2 parameter setting interface.
○

P2 Wheel Speed Pulse Signal Setting

P1 parameter setting interface
- 21 -
button to save the current set values
button (UP) or