Automatic Prompt Interface; Error Code Display; Motor Operating Temperature Alarm; User Project Setting - SZKTDZ KT-LCD8S User Manual

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
Under the status of data flashing, if there were no operations on the data within 5
seconds, the meter will automatically return to display1 after 5 seconds, and the
original record content will be saved.
○
Automatically Prompt Interface
Error Code Display：
When the electronic control system of the electric vehicle fails, and the meter will
automatically display (flicker) fault code. You can't exit the fault code display only the
fault is removed.
Error Code & Definition Table：
Motor position sensor fault!
Motor or controller short circuit fault! short-circuit in motor or controller
THROTTLE fault!
Motor operating temperature alarm：
Under any interface, when the motor operating temperature exceeds the warning value,
the motor operating temperature display flashes to alarm, meanwhile, the controller will
offer the appropriate protection to motor(this function should be customized)
User Setting Project
KT-LCD8S meter user setting project：
◇
General project setting
Error Code
定义
illegal signal for motor hall sensor
illegal signal of throttle
- 15 -