User Project Setting; General Project Setting; Maximum Trip Speed - SZKTDZ KT-LCD8S User Manual

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
User Setting Project
KT-LCD8S meter user setting project：
◇

General project setting

◇
P parameter setting
◇
C parameter setting
General Project Setting
○

Maximum Trip Speed

Under power off status, hold
5 seconds after boot-up, hold
simultaneously for about 2 seconds, the first is to enter the maximum riding speed setting
interface, press
button shortly (UP) or
speed value. The default maximum riding speed value was 25KM/H. When the speed of
the electric vehicle exceeds the set value, the motor will be stopped driving.
Under the setting maximum riding speed interface, if there's no button operation
on the meter for more than 1 minute, and then the meter will automatically return to
display 1, and the original set values will be saved.
After finishing the maximum riding speed setting, press
button long (SW), the meter is turned on. Within
button shortly (SW) ,then the speed display column flashes. Press
button (DOWN) in order to set the maximum riding
button (UP) and
- 18 -
button (DOWN)
button shortly (SW) ,