C14 Power-Assist Tuning Parameters Setting - SZKTDZ KT-LCD8S User Manual

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
After finishing C13 parameter setting, press
value and then press
○

C14 Power-assist tuning parameters Setting

Enter C14 parameter setting interface, press
flashes.
C14 is the parameters of power-assist tuning setting, with the default value of 2. The
power-assist is between1-4 gear, and it is invalid until P3 equals to 1. The setting range 1-3,
and press (UP) button or
C14 parameter definition table:
C14 Value
After finishing C14 parameter setting, hold
seconds to exit C parameter setting environment and return to the display 1.
button (DOWN) to enter C14 parameter setting interface.
C14 parameter setting interface
(DOWN) button for short to make selection.
1
2
3
button (SW) to save the current
button (SW), C14 parameter bar
Assist strength of intelligent pedal motor
Weak assist strength of motor
General assist strength of motor
Stronger assist strength of motor
button (SW) long for about 2
- 42 -