ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
Throttle
gears
4
according to the display meter.
5
When C4 = 2 is confirmed, "specified speed limit value of throttle " flashes, press
(UP) button or
value is 20.
When C4 = 4 is confirmed, the "percentage value of the first gear speed accounts
for its full speed" of the power assist gear flashes, press
(DOWN) button for short to make selection, and the default value is 50%. The
percentage values of other gears divide automatically in equal.
After finishing C4 parameter setting, press
value and then press
○
C5 Controller Maximum Current Adjustment Setting
Enter C5 parameter setting interface after C4 parameter setting is finished, press
button (SW) , C5 parameter column flashes.
is
distinguished
Retain
(DOWN) button for short to make selection, and the default
button (DOWN) to enter C5 parameter setting interface.
- 30 -
Non-zero startup throttle, Throttle gears is
distinguished according to the display meter.
button (SW) to save the current
Retain
(UP) button or