C10 Automatic Restore Default Setting - SZKTDZ KT-LCD6 User Manual

The password setting is done sequentially from left to right, hold
to confirm after each setting and enter next setting. Password setting range is 000-999, hold
button (UP) or
Please note：If you forget your password, the parameters can only be copied (see
parameter copy) by data source meter prier to be decoded.
After finishing C9 parameter setting, hold
current set values and enter C10 parameter setting interface.
○
C10 Automatically Restore Factory Setting
Enter C10 parameter setting interface after C9 parameter setting is finished, C10
parameter column flashes.
C10 is automatic restore factory settings, the default is n, and the setting can be n, or y,
hold button (UP) or
C10 parameter definition table：
C10 value
When the meter is needed to restore default setting, C10 selects y, hold
long for about 2 seconds, all parameters restore default settings and exit setting
ELECTRIC BICYCLE METER KT—LCD6 Product User Manual
button (DOWN) shortly for selection.
C10 parameter setting interface
button (DOWN) shortly for selection.
n
y
button (SW) shortly to save the
Restore default setting
Function off
Function on
- 35 -
button shortly
button