SZKTDZ KT-LCD8S User Manual page 40

ELECTRIC BICYCLE METER KT—LCD8S Product User Manual
C11 is meter attribute selection setting, the setting range is 0-2, press
(UP) or button (DOWN) for selection.
C11 parameter definition table：
C11
value
Meter uses LCD8S new version of communication protocol, it is compatible
0
Meter uses LCD1 and LCD2 old version communication protocol, it is not
1
As data source for copying parameters, the meter transfers the new LCD8S
2
C11 selects 2, hold
environment, and then the meter is served as data source for copying parameter (see
parameter copy), there's source logo on display interface.
C11 parameter setting interface
Meter Attribute
LCD1 and LCD2.
compatible LCD8S.
parameter to other meters.
(SW) long for about 2 seconds to exit the setting
- 38 -
button