Keithley 2606B System SourceMeter Reference Manual page 614

Section 7: TSP command reference
Usage
enableRegister = status.system5.condition
enableRegister = status.system5.enable
enableRegister = status.system5.event
enableRegister = status.system5.ntr
enableRegister = status.system5.ptr
status.system5.enable = enableRegister
status.system5.ntr = enableRegister
status.system5.ptr = enableRegister
enableRegister
Details
In an expanded system (TSP-Link), these attributes are used to read or write to the system summary
registers. They are set using a constant or a numeric value, but are returned as a numeric value. The
binary equivalent of the value indicates which register bits are set. In the binary equivalent, the least
significant bit is bit B0, and the most significant bit is bit B15. For example, if a value of
1.30000e+02 (which is 130) is read as the value of the condition register, the binary equivalent is
0000 0000 1000 0010. This value indicates that bit B1 and bit B7 are set.
B15 B14
** >
0 0
* Least significant bit
** Most significant bit
For information about .condition, .enable, .event, .ntr, and .ptr registers, refer to
contents (on page E-1) and
register are defined in the following table.
Bit Value
Not used
B0
status.system5.NODE57
B1
status.system5.NODE58
B2
status.system5.NODE59
B3
status.system5.NODE60
B4
status.system5.NODE61
B5
status.system5.NODE62
B6
status.system5.NODE63
B7
status.system5.NODE64
B8
Not used
B9-B15
As an example, to set bit B1 of the system summary 5 enable register, set
status.system5.enable = status.system5.NODE57.
7-330
The status of the system summary 5 register; a zero (0) indicates no bits set; other
values indicate various bit settings
B13 B12 B11 B10
> > > >
0 0 0 0
Enable and transition registers
2606B System SourceMeter® Instrument Reference Manual
B9 B8 B7 B6 B5
> > > >
0 0 1 0
(on page E-16). The individual bits of this
Description
Not applicable
Bit B1 decimal value: 2
Bit B2 decimal value: 4
Bit B3 decimal value: 8
Bit B4 decimal value: 16
Bit B5 decimal value: 32
Bit B6 decimal value: 64
Bit B7 decimal value: 128
Bit B8 decimal value: 256
Not applicable
B4 B3 B2 B1
> > > > >
0 0 0 0 1
Status register set
2606B-901-01 Rev. B / May 2018
B0
*
0