Flash Time; Key Lock; Key Tone; Handset Ring Tone - Sanyo LNS-W10 Instruction Manual

INITIAL PROGRAMMING

Flash time

Consult your telephone company before changing the Flash time setting. Changing
this setting may cause your telephone company service such as call waiting to not
work properly.
1. Press the MENU/OK key.
2. Press or
3. Press the MENU/OK key.
4. Press or
5. Press MENU/OK.
6. Press or
The default setting is LONG.
7. Press MENU/OK to confirm your selection.

Key lock

You can lock the keypad to prevent keys from accidentally being pressed. To lock
the keypad:
1. Press MENU/OK.
2. Press or
3. Press MENU/OK to enter the "KEY LOCK" sub menu.
4. Press or
5. Press MENU/OK to confirm settings. The default setting is OFF.
To unlock the keypad:

Press 1,5,9 to unlock the keypad.

Key lock is disabled in the event of an incoming call, but returns to key lock
when the call ends.

Key lock is disabled after an emergency call.
Note: To dial an emergency number while the keypad is locked, press TALK
followed by the emergency number (000,110,112,119,911,999).

Key tone

Turn this feature on to hear a click every time a key is pressed on the keypad. This
option is not available when the keypad is locked. To activate the key click option:
1. Press MENU/OK.
2. Press or
3. Press MENU/OK.
4. Press or
5. Press MENU/OK to confirm settings. The default setting is ON.

Handset ring tone

You have a choice of 10 ring tones for internal or external incoming calls so you can
tell from the sound of the ring whether the call is coming from an external or internal
source. To select a ring tone:
to select "DIALING" from the options.
to select "FLASH TIME" from the submenu.
to select "LONG" or "SHORT".
to scroll to "KEY LOCK".
to select (ON).
to scroll to "KEY CLICK".
to select on or off.
12