Download  Print this page

Light Signals - Sanyo LNS-W10 Instruction Manual

2.4 ghz digital cordless telephone with 2 caller id handsets and extra charger
Hide thumbs

Advertisement

UNKNOWN # / NAME /
CALLER
FORWARD CALL
DELETE?
DELETE ALL?
MESSAGE WAITING
STORE NUMBER
STORE NAME
PHONEBOOK EMPTY
CALL LOG EMPTY
NO LINE
KEY LOCKED
OUT OF SERVICE
CHARGE BATTERY
PLACE IN CHARGER
RINGER OFF

LIGHT SIGNALS

The charge/in use indicator will change under the following conditions.
CHARGE/IN USE LED on the base
Some or all of the Caller ID information was not
sent with the call
A call has been forwarded
Prompt asking you if you want to erase the
current Caller ID entry or a directory entry that
is shown on screen
Prompt asking you if you want to erase all
Caller ID information
Caller has left a message (you must subscribe
to voice mail service offered by your local
phone company for this to work)
Prompt telling you to enter a telephone number
in the directory
Prompt telling you to enter a name in the
directory
There is no record stored to the selected
directory location
There is no record stored to the selected call
log location
Telephone line is disconnected from base unit
The keypad is locked
When the handset is out of range or the base
unit power failure
When the battery is low
The battery voltage is too low
The ringer is switched off
27

Advertisement

Table of Contents
loading

  Also See for Sanyo LNS-W10

  Related Manuals for Sanyo LNS-W10

This manual is also suitable for:

Clt-w10