Download  Print this page

Choosing A Location For The Base Unit And Handset Cradle; Connecting The Base Unit - Sanyo LNS-W10 Instruction Manual

2.4 ghz digital cordless telephone with 2 caller id handsets and extra charger
Hide thumbs



Choosing a location for the base unit and handset cradle

The base unit records and displays the indoor temperature, when selecting a
location, observe the following guidelines:
Choose a location that provides easy access to a 120-volt AC power
Choose a location that will allow the telephone cable to reach a telephone
jack. You can use an extension jack or cable if necessary.
Place the base unit as high as possible to get a better radio frequency range
with the handset. You may need to try several locations – such as upstairs,
or near a first-floor landing – to find the best range. Solid structures such as
walls and doors may reduce the signal strength.
Do not place the base unit near a sink, bathtub, or shower.
Do not place the base unit near objects that may cause radio interference,
such as another telephone, large metal objects such a mirror or filing
cabinet, or electrical appliances such as an electric stove, washing machine,
microwave oven, television, and fluorescent lights.
Do not place the unit near heat sources such as radiators or air ducts, or in
a place subject to direct sunlight.

Connecting the base unit

Plug the AC adaptor into the power jack at the back of the base. Plug the
other end into an electrical outlet.
Plug the telephone line cord into the tel. line jack at the back of the base.
Plug the other end into a modular phone jack.
Note: Two adapters are shipped with this product. Please check the label on
the adapter to make sure you are using the right one.


Table of Contents

  Also See for Sanyo LNS-W10

  Related Manuals for Sanyo LNS-W10

This manual is also suitable for: