Related Manuals for Sanyo CLT-D11
Summary of Contents for Sanyo CLT-D11
- Page 1 INSTRUCTION MANUAL CLT-D11 DECT with Caller ID Important Charge the handset battery for 16 continuous hours prior to first use. The initial battery charge is important for best performance. SANYO Electric Co.,Ltd.
-
Page 2: Table Of Contents
TABLE OF CONTENT INTRODUCTION -------------------------------------------------------------- 4 Important Warning ------------------------------------------------------- 4 GETTING STARTED --------------------------------------------------------- 5 Checking Package Contents ----------------------------------------- 5 Battery Setup ------------------------------------------------------------- 6 Telephone line connection -------------------------------------------- 7 Charging the handset batteries -------------------------------------- 7 NAMES AND CONTROLS ------------------------------------------------- 8 Handset -------------------------------------------------------------------- 8 Base Unit ------------------------------------------------------------------ 9 LCD Screen Messages ------------------------------------------------ 9 BASICS ------------------------------------------------------------------------ 10... - Page 3 TABLE OF CONTENT CALLER ID FEATURES -------------------------------------------------- 15 Reviewing Caller ID List --------------------------------------------- 16 Dialing a Caller ID number ------------------------------------------ 16 Deleting entries from the caller list -------------------------------- 16 BABY MODE ----------------------------------------------------------------- 17 To set a Baby Mode phone number ------------------------------ 17 To set Baby Mode ON ------------------------------------------------ 18 To set Baby Mode OFF ---------------------------------------------- 18 HANDSET SETTING ------------------------------------------------------- 19...
-
Page 4: Introduction
INTRODUCTION Congratulations on your purchase of this Sanyo cordless telephone. Your Sanyo DECT cordless telephone is a high-quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronic equipment. With proper maintenance and care, it will provide you with years of enjoyment and convenience. -
Page 5: Getting Started
GETTING STARTED Checking Package Contents Make Sure your package includes the items show here. 1. Handset 2. Base unit 3. Battery cover 4. AAA batteries, 2 pieces. 5. Telephone Line Cord. 6. AC Adaptor (Model No. KA24D060030033S) Installation tips To minimize or prevent interference with other electrical devices, the base of the DECT cordless should not be placed near or on top of a TV, microwave oven, or VCR. -
Page 6: Battery Setup
Note: It is normal for the handset and base to get warm when the handset is charging in the base. Caution: Use only the Sanyo adapter that is supplied with this phone. Using other AC adapter may damage the telephone. -
Page 7: Telephone Line Connection
GETTING STARTED Telephone line connection 4. Plug the telephone line cord into the TEL LINE socket on the back of the base. Plug the other end into the telephone line socket. Charging the handset batteries You must charge the handset batteries for 16 continuous hours the first time you use them. -
Page 8: Names And Controls
NAMES AND CONTROLS Handset 7. LCD screen 1. Belt clip 8. Program Key 2. CID (Caller ID retrieve 9. Phone key key)/Recall. 10. Memory key 3. Cancel key / Mute 11. Keypad 0-9 4. Intercom Key (used on for 12. * / Lock key system with 2 handsets) 13. -
Page 9: Base Unit
NAMES AND CONTROLS Base Unit 1. Handset cradle 2. CHARGE LED 3. Page key LCD SCREEN MESSAGES Missed Call Key lock Microphone Mute OFF Hook Battery Antenna... -
Page 10: Basics
BASICS Receiving a call When an incoming call is received, the phone will ring on the handset and the handset will show the caller information . *Note: A subscription is required from your local phone company to receive Caller ID information on your phone. See Caller ID Features, page 15. -
Page 11: To Adjust The Receiver Volume
BASICS To adjust the receiver volume 1. When the phone is on hook, press and then the [4] key. The handset enters the receiver volume adjustment mode. There are three receiver levels of low, medium and high selections by pressing the [1], [2] and [3] keys respectively. 2. -
Page 12: Redialing
BASICS Redialing (up to 18 digits) 1. Make sure the phone is OFF (not in TALK mode). 2. To call one of the last five numbers dialed, press repeatedly until the number you want is displayed on the LCD, then press key. -
Page 13: To Dial A Number From Memory
BASICS To dial a number from memory 1. Make sure the phone is OFF (not in TALK mode). 2. Press repeatedly to scroll to the number you want to dial. Press key then press numeric key (0-9) to select the desired number. -
Page 14: Low Battery Warning
BASICS Low battery warning There are three short beeps to alarm that the battery is empty and the battery is needed to recharge. After the beeps, the battery icon will indicate the battery is empty as showing (... -
Page 15: Caller Id Features
CALLER ID FEATURES To use the Caller ID you must first subscribe to your network Service Providers' Caller ID Service. The network operator may apply a small regular charge for this service. If you subscribe to Caller ID Service, you can see on the display the caller's phone number (unless the number has been withheld). -
Page 16: Reviewing Caller Id List
CALLER ID FEATURES Reviewing Caller ID List When the handset is at standby mode, press key and the Caller ID list of the last 15 unanswered calls will show. The most recent unanswered call will be show as first record. The user may press the key to scroll from the most recent to the oldest. -
Page 17: Baby Mode
BABY MODE The Baby Mode feature is very useful and has many applications. This feature is available only when the baby mode is ON. In Baby Mode when the key or any one of the dial keys are pressed the phone will automatically dial any number that you have pre- programmed. -
Page 18: To Set Baby Mode On
BABY MODE To set Baby Mode ON 1. Press the and then the [2] key. NOTE: If the Baby Mode phone number has not been programmed, the phone will not enter the Baby Mode and will return to STANDBY mode. 2. -
Page 19: Handset Setting
HANDSET SETTING Select Ringer Tones 1. To enter the Ringer tone selection, press the and then the [5] key. There are 6 different ringer melodies selectable via the [1] to [6] keys. The handset ringer will provide the respective ringing melody when any of these keys is pressed. -
Page 20: System Pin Number
HANDSET SETTING System PIN number The Sanyo DECT has built-in a system PIN which is used for preventing misuse of certain features or accidental mis-programming of certain features such as Baby Mode (described in the previous section). The factory default setting for the Pin Number is 0000. You can change it to any other four digits you can remember easily. -
Page 21: Handset Initial Setting
HANDSET SETTING Handset Initial Setting Function Initial Setting Dialing Mode Tone Handset Ringer Volume Handset Ringer Pattern Handset Receiver Volume PIN Number 0000 Recall Time 100ms Baby Mode... -
Page 22: Changing The Battery
CHANGING THE BATTERY Battery replacement and handling When the operating time becomes short even after a battery is recharged, please replace the batteries. With normal usage, your battery should last about one year. Caution: Use only the specified battery type (AAA Ni-MH 1.2V, 550mAh). Only use rechargeable batteries. -
Page 23: Trouble-Shooting
TROUBLE-SHOOTING CALLER-ID No Display • Is the battery fully charged? Try to replace the batteries. • Make sure that the base is connected to a non-switched AC outlet. Disconnect the base from the plug and plug it in again. • Have you subscribed to the Caller ID service from your local telephone company? The display will not work unless you do this. -
Page 24: Maintenance
TROUBLE-SHOOTING Causes of poor reception • Aluminum siding. • Foil backing on insulation. • Heating ducts and other metal construction can shield radio signals. • You are too close to appliances such as microwaves, stoves, computers etc. • Atmospheric conditions, such as storms. •... -
Page 25: Refresh Battery
REFRESH BATTERY If your batteries seem to need recharging more often than usual, it may have lost part of its charging capacity because of premature recharges. To bring back its full capacity, try “refreshing” the batteries: 1. First discharge the batteries by leaving the handset in TALK mode until Battery Low indicator turns on (Disconnect the base from the phone line, so that your line is not busy all the time.) 2. - Page 28 SANYO Electric Co.,Ltd. 086-732808000-00...