Page 1
UP800DH(CLT-D5880) OM 1/24/06 INSTRUCTION MANUAL 5.8-GHz Cordless Telephone with Caller ID & Visual Call Waiting IMPORTANT Charge the handset battery pack for a full 15-20 hours before using your cordless handset for the first time. 3:37 PM Page i CLT-D5880...
Clock Display Animation Displays Your SANYO 5.8-GHz cordless telephone is a fine quality home communications product. It is carefully designed and produced by a world leader of consumer and industrial electronics equipment. With proper maintenance and care, it will provide you with years of enjoyment and convenience.
UP800DH(CLT-D5880) OM 1/24/06 CONTENTS Introduction...inside front cover Features ...inside front cover Controls and Functions...E2 GETTING STARTED Checking the Package Contents...E4 Setting Up the Phone...E4 Mounting the Base Unit On a Wall...E9 USING THE INTERFACE Display and Icons ...E11 Soft Key Function ...E13 Main Menu Options...E14...
UP800DH(CLT-D5880) OM 1/24/06 Controls and Functions 1. Handset Antenna 2. Beltclip Hole 3. Speakerphone Speaker and Ringer 4. Handset Battery Compartment 5. New Message LED 6. Handset Earpiece 7. LCD Display 8. Soft Keys 9. VOL (volume up/down) /TONE/ (left cursor)
Page 5
UP800DH(CLT-D5880) OM 1/24/06 21. Base Charging Contacts 22. Base Antenna 23. Base CHARGE LED For multi-handset packs only 27. Charging Contacts 28. Charger CHARGE LED 29. DC IN 9V Jack 3:37 PM Page 3 24. PAGE 25. DC IN 9V Jack...
UP800DH(CLT-D5880) OM 1/24/06 GETTING STARTED Checking the Package Contents Make sure you have received the following items in the package. For CLT-D5880 • Base unit (1) • AC adapter (1) • Telephone cord (1) • Handset (1) • Rechargeable battery (1) •...
Page 7
IMPORTANT Use only the SANYO rechargeable battery pack supplied with your cordless telephone. Charge the handset battery pack for at least 15-20 hours before using your new cordless telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged.
UP800DH(CLT-D5880) OM 1/24/06 GETTING STARTED Low Battery Alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, ¨...
Page 9
IMPORTANT • Use only the supplied SANYO AC adapter. Do not use any other AC adapter. • Do not place the power cord so that it creates a trip hazard or where it could become damaged and create a fire or electrical hazard.
Page 10
UP800DH(CLT-D5880) OM 1/24/06 GETTING STARTED Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and to a telephone outlet. Tip: If your telephone outlet isn't modular, contact your telephone company for assistance.
UP800DH(CLT-D5880) OM 1/24/06 GETTING STARTED Mounting the Base Unit On a Wall Standard Wall Plate Mounting This phone can be mounted on any standard wall plate. Put the AC adapter and the telephone line cord through the hole on the wall mount adapter.
UP800DH(CLT-D5880) OM 1/24/06 GETTING STARTED Direct Wall Mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Display and Icons Example of the standby mode display Ringer off icon (when the ringer is off) / day of the week and time / battery icon Handset ID Number of new Caller ID calls received (If there are no new Caller ID messages, the Handset ID appears here.)
Page 14
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Animation Displays The handsets have a variety of animation displays. Below are examples of the animation screens and what they mean: Turning on the phone Deleting (Deleted!) Also, the animation display changes depending on the ringer volume setting.
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Soft Key Function "Soft" keys are keys that change function during the operation of the phone. There are three soft keys on each handset. Soft Keys allow you to: - Access the main menu...
UP800DH(CLT-D5880) OM 1/24/06 USING USING THE INTERFACE THE INTERFACE Main Menu Options Your phone has five main menu options: Walkie-Talkie Mode, Room/Baby Monitor, Handset Setup, Global Setup and Deregister HS. Default Settings The default settings set from the factory match the features that most people use.
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Setting Menu Options Below are some tips for using the software interface on your phone. • Press the MENU soft key to access the main menu. • Use VOL/ and VOL/ to scroll through options.
Page 18
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Room/Baby Monitor This feature allows you to monitor sounds in another room. Place a handset in the room you wish to monitor; it will function as a microphone. A second handset can be set to function as a remote speaker, allowing you to monitor sounds in the room.
Page 19
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Handset Setup The following submenu options must be set separately for each handset. Programming your Voice Mail Access Number Press the MENU soft key. Select the Handset Setup menu, and then the Edit Voice Mail submenu.
Page 20
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Distinctive Ringer Setup Distinctive Ringer allows you to assign a designated ring tone to a stored phonebook number (100 stored locations available). When a call is received and the Caller ID information matches the information in one of the phonebook memory locations, the phone uses the distinctive ring assigned to that particular caller.
Page 21
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Setting the True Banner True Banner lets you customize the name your handset displays. The name will be displayed on the LCD screen during standby mode, Intercom, Intercom Hold, Room Monitor and Copy Phonebook operation.
Page 22
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Setting the Key Touch Tone Key Touch Tone is the tone your keypad makes when keys are pressed. You can turn this tone on or off. Press the MENU soft key. Select the Handset Setup menu and then the Key Touch Tone submenu.
Page 23
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Global Setup If you change one of the global settings, you change that setting for all registered handsets. Only one handset can change global settings at a time. Setting Day and Time Day & Time sets the day and time of your display.
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Setting the Area Code If you enter a 3-digit area code number in the "Area Code" option, your local area code does not appear in the Caller ID message. For calls received from outside your local area code, you will see a full 10-digit number.
Page 25
UP800DH(CLT-D5880) OM 1/24/06 USING THE INTERFACE Setting Voice Mail Tone Voice Mail Tone sets the voice mail tone. If your service does not support SDT message signal, set your VMWI (Visual Message Waiting Indicator) not to detect SDT message signal.
UP800DH(CLT-D5880) OM 1/24/06 BASICS Making and Receiving Calls With the handset's duplex speakerphone, you can have hands-free conversations. icon appears on the display screen during hands-free conversations. You can easily switch a call from normal conversation to hands-free conversation. To switch a call, press SPEAKER during the call.
Page 27
UP800DH(CLT-D5880) OM 1/24/06 BASICS Normal Conversation Handset On the Cradle Pick up the handset (Automatic Talk is: on) or pick up the handset and press TALK/FLASH To answer a (Automatic Talk is: off). call Handset Off the Cradle Press any number key,...
UP800DH(CLT-D5880) OM 1/24/06 BASICS Call Waiting If you have Call Waiting service and a call waiting tone sounds while you are on a call, press TALK/FLASH on the handset to accept the waiting call. There is a short pause, and then you will hear the new caller.
UP800DH(CLT-D5880) OM 1/24/06 BASICS Redialing a Call The last three phone numbers dialed can be quickly redialed from the handset. Redial numbers stored in the handset are independent from each other. With the phone in standby mode, press the REDIAL soft key.
UP800DH(CLT-D5880) OM 1/24/06 BASICS Adjusting the Ringer, and Earpiece and Speaker Volume Ringer Volume In standby mode, press the volume up key or volume down key on the handset to select one of three ringer volumes (Off, Low, or High).
UP800DH(CLT-D5880) OM 1/24/06 BASICS Tone Dialing Switch-over If your telephone company requires pulse dialing, you can switch-over to tone dialing after the call connects. This feature is useful when you need tone dialing to use any automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc.
UP800DH(CLT-D5880) OM 1/24/06 BASICS Using One Touch Voice Mail Access If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The new message LED flashes whenever you have messages waiting in your voice mailbox.
UP800DH(CLT-D5880) OM 1/24/06 DIRECTORY Phonebook (Storing Phone Numbers, Names, Distinctive Rings and Speed Dial) You can store names and numbers in your phone's phonebook, search for names alphabetically, and dial phonebook entries with just a few key presses. You can store up to 100 numbers in each registered handset.
UP800DH(CLT-D5880) OM 1/24/06 DIRECTORY appears. Press VOL/ to move the pointer to one of the Distinctive Ring options and then press the OK soft key. appears. Press VOL/ move the pointer to select the Speed dial location (10 locations: SPD1-SPD0).
UP800DH(CLT-D5880) OM 1/24/06 DIRECTORY Steps for Entering Names and Special Characters Refer to the letters on the number keys to select the desired characters. With each press of a number key (0-9), the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key.
Page 36
UP800DH(CLT-D5880) OM 1/24/06 DIRECTORY For example, to enter Movies: When the phone is in standby mode, press appears. Press 6 once, and then press #/ Press 6 six times. Press 8 six times. Press 4 six times. Press 3 five times.
UP800DH(CLT-D5880) OM 1/24/06 DIRECTORY Viewing the Phonebook Your phone stores names/numbers in the phonebook memory locations, and you can search names in alphabetical order. You can view the phonebook even while the phone is in use. Press . If you recall the phonebook during a call, the COPY and STORE soft key will not appear.
UP800DH(CLT-D5880) OM 1/24/06 DIRECTORY Making Calls Using the Phonebook From Standby Mode When the phone is in standby mode, select the phonebook location to dial (see "Viewing the Phonebook" on page E35). Press TALK/FLASH or SPEAKER on the handset. The displayed number is dialed.
UP800DH(CLT-D5880) OM 1/24/06 DIRECTORY Editing or Erasing a Stored Name, Phone Number, Distinctive Ring and Speed Dial When the phone is in standby mode, press Press VOL/ , VOL/ , or the number keypad to select the phonebook locations (see "Viewing the Phonebook"...
UP800DH(CLT-D5880) OM 1/24/06 DIRECTORY Copying Phonebook Locations (CLT-D5882/CLT-D5883) If you have two handsets, Copy Phonebook allows you to transfer stored phonebook locations from handset to handset so you don't have to manually re-enter names and numbers. You can transfer one memory (phonebook location) at a time, or all memory locations at once.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID Caller ID and CIDCW (Caller ID on Call Waiting) You must subscribe to Caller ID services through your local telephone provider to use these features. When the telephone rings, the Caller ID feature allows you to view the caller's name, phone number, date and time of call.
Page 42
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID Notes: • If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear. • When the call is received via a telephone company that does not offer Caller ID service, the caller's phone number and name does not appear.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID Viewing the Caller ID List You can view the Caller ID list through the handset during a call or when the phone is in standby mode. Press CID. The summary screen appears. The screen shows the number of new messages and total messages.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID Deleting a Caller ID Message Deleting Information from the Caller ID List When the phone is in standby mode, view the Caller ID information to be deleted (see "Viewing the Caller ID List" on page E41).
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID Using the Caller ID Message List Calling a party from the Caller ID list Standby Mode When the phone is in standby mode, select the Caller ID message (see "Viewing the Caller ID List" on page E41).
Page 46
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID Notes: • When a long distance call has been set, " " appears in the display. • If the Caller ID message was received as a private/unknown number, or the message does not have the number, you cannot store the message in the Phonebook. If it was received as private/unknown name, the message will be stored as <No Name>.
UP800DH(CLT-D5880) OM 1/24/06 CALLER ID Call Waiting Deluxe Features Your phone gives you new options for call waiting. At the touch of a button, you can place the caller on hold, send them to your voice mail service, or conference them into your current call. You must subscribe to Call Waiting and Call Waiting Deluxe to use these features.
UP800DH(CLT-D5880) OM 1/24/06 MULTI-HANDSET The features in this section require a minimum of two handsets to operate. Using the Walkie-Talkie Mode To use this feature, you must enter the handsets into Walkie-Talkie mode first. To enter Walkie-Talkie mode, see page E15.
UP800DH(CLT-D5880) OM 1/24/06 MULTI-HANDSET 3-Way Conferencing The phone permits 3-way conversations between 2 handsets and an outside line. Initiate the call normally. Once the call is in progress, other people can join the call. To join a conference call, press TALK/FLASH or SPEAKER on the other handset.
UP800DH(CLT-D5880) OM 1/24/06 MULTI-HANDSET Call Transfer Feature During a call, press INTCM/HOLD on the handset. Select a handset to transfer the call to within 10 seconds. To select the handset, press VOL/ and then press the OK soft key. If you select all other handsets will be paged.
The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code: In standby mode, select OK soft key.
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL Installing the Beltclip To attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. To remove the beltclip Pull either side of the beltclip to release the tabs from the holes.
With normal usage, your battery should last about one year. Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the SANYO battery model and SANYO adapter model specifically designated for this product.
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom The CHARGE LED • Make sure the AC adapter is plugged into the base or won't illuminate the charger (if you have more than one handset) and when the wall outlet.
Page 55
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL Symptom Severe noise • Keep the handset away from microwave ovens, interference. computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference.
UP800DH(CLT-D5880) OM 1/24/06 ADDITIONAL Technical Information IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.
RESPONSIBILITY You, the original retail purchaser, must present your original, dated bill-of-sale together with this warranty to SANYO Canada Inc. or to an authorized SANYO Service Depot when you make a claim under this warranty. You, the original retail purchaser, are responsible for any costs of TRANSPORTING the product to and from SANYO Canada Inc.
SOS means you never have to worry. C.O.D. and/or Collect shipments will not be accepted. Unit must be returned to SANYO in its original box with all accessories, i.e.: owner’s manual, battery, adaptor, telephone cord, etc.
UP800DH(CLT-D5880) OM 1/24/06 3:39 PM Page 57 Main Menu Flow Chart...
Page 60
UP800DH(CLT-D5880) OM 1/24/06 May be covered under one or more of the following U.S. patents: 4,797,916 5,381,460 5,426,690 5,434,905 5,533,010 5,574,727 5,581,598 5,650,790 5,663,981 5,671,248 5,696,471 5,717,312 5,758,289 5,768,345 5,787,356 5,794,152 5,864,619 5,893,034 5,912,968 5,915,227 5,960,358 5,987,330 6,044,281 6,070,082 6,314,278...