Download  Print this page

Power Failure; Lcd Screen Messages - Sanyo LNS-W10 Instruction Manual

2.4 ghz digital cordless telephone with 2 caller id handsets and extra charger
Hide thumbs

Advertisement

POWER FAILURE

When power is off, you will not be able to make or receive calls with the telephone.
After a power outage, it may take a few seconds for the handset to reconnect to the
base unit.

LCD SCREEN MESSAGES

The following indicators show the status of a message or of the phone.
BASE PAGING
BUSY
CALL ALL
CALL BACK
CHARGING
CONFERENCE CALL
ENDED
EXT IN USE
EXTERNAL CALL
FAIL
H
INTERNAL CALL
HANDSET # / HANDSET NAME
MIC MUTE
PRIVATE # / NAME / CALLER
READY
TALK
Someone has pressed PAGE on the base unit
The dialed number or handset is busy
An intercom call has been placed to all
registered handsets
A forwarded call was not answered
Battery is charging
2 handsets are on a conference call
The call has ended. The elapsed time for the
call also shows.
Another handset is already on an external call
A call was received with no Caller ID
information provided
Registration did not occur
A call has been placed on hold
An intercom call has been placed from the
displayed handset
The handset is in mute mode
Some or all of the Caller ID information was
blocked
Phone is charged and ready to make or receive
calls
Phone is in Talk mode (ready to place a call or
on a call). If on a call, the duration of the call
also shows
26

Advertisement

Table of Contents
loading

  Also See for Sanyo LNS-W10

  Related Manuals for Sanyo LNS-W10

This manual is also suitable for:

Clt-w10