Download  Print this page

Multi-Handset Configuration; Registering A Handset; Identifying A Handset On The Network; Intercom (Internal) Call - Sanyo LNS-W10 Instruction Manual

2.4 ghz digital cordless telephone with 2 caller id handsets and extra charger
Hide thumbs

Advertisement

appears as 1-416-222-5555, but it is not a long distance number, press
REDIAL/PAUSE key until it shows 416-222-5555 (without 1).
DIRECTORY
The REDIAL/PAUSE key lets you select how many digits of the number are displayed:
7
7-digit telephone number.
10
3-digit area code + 7-digit telephone number.
11
Long distance code 1 + 3-digit area code + 7-digit telephone number.
1.
Press
in standby mode to enter call log quickly.
2.
Press
or
3.
Press REDIAL/PAUSE to rearrange the format of the number displayed.
4.
Press MENU/OK, "STORE NUMBER" will appear.
5.
Edit the number if necessary.
6.
Press MENU/OK to edit the name, "STORE NAME" will appear.
7.
Edit the name if necessary.
8.
Press MENU/OK to confirm the change.
Result: A beep will sound to confirm the changes.

MULTI-HANDSET CONFIGURATION

Registering a handset

The original handsets provided are automatically registered the first time you set up
the telephone. You may need to register handsets under the following if you are
replacing a faulty handset. (See the Troubleshooting section on page 29 if you are
experiencing problems with the handset).
Note: If you register a handset to more than one base, you will need to rename
the handset for that base. Otherwise, the base will recognize it as "Handset 1".
To register handset:
1.
Press the MENU/OK key.
2.
Press
or
3.
When the handset display shows "PLEASE WAIT", press and hold PAGE on the
base until IN USE LED (red) flashes fast.
4.
If the registration is successful "SUCCESS" will show on the handset display.
Note: If the registration is unsuccessful "FAIL" will show on the handset display. In
this case, you should try again.

Identifying a handset on the network

You can identify each handset by assigning a name to it. Please see the Handset
Name Setting section on page 11 for more information.

Intercom (internal) call

to select desired Caller ID entry.
to select "REGISTER", then press MENU/OK to confirm.
21

Advertisement

Table of Contents
loading

  Also See for Sanyo LNS-W10

  Related Manuals for Sanyo LNS-W10

This manual is also suitable for:

Clt-w10