Download  Print this page

Getting Started; Checking Package Contents; Modular Jack - Sanyo LNS-W10 Instruction Manual

2.4 ghz digital cordless telephone with 2 caller id handsets and extra charger
Hide thumbs

Advertisement

GETTING STARTED

Checking package contents

Make sure your package includes the items shown here.
Base unit
2 x Belt clips

Modular jack

You need an RJ11 type modular phone jack. If you do not have a modular jack,
call your local phone company to find out how to have one installed.
Installation tips
Some cordless telephones operate at frequencies that may cause interference to
nearby TV, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be placed near or on
top of a TV, microwave oven, or VCR. If such interference continues, move the
cordless telephone farther away from these appliances.
Certain other communications devices may also use the 2.4 GHz frequency for
communication and if not set properly these devices may interfere with each other
and/or your new telephone. If you are concerned with interference, please refer to
the owner's manual for these devices on how to properly set channels to avoid
interference. Typical devices that may use the 2.4 GHz frequency for
communication include wireless audio/video senders, wireless computer
networks, multi-handset cordless telephone systems, and some long-range
cordless telephone systems.
Handset cradle
Telephone line cord
5
2 x Handsets
(PI-41-735US)
2 x Batteries
Battery order
2 x AC
Adaptors
(A10920)
sheet

Advertisement

Table of Contents
loading

  Also See for Sanyo LNS-W10

  Related Manuals for Sanyo LNS-W10

This manual is also suitable for:

Clt-w10