Erasing A Stored Name And Phone Number - Sanyo CLT-9950 Instruction Manual

CLT9950 2nd 6/23/00
DIRECTORY

Erasing a stored name and phone number

4
Press to move the cursor down to the
Delete Memory
5
Press SELECT. The following confirmation screen
appears.
6
Press to move the cursor to
7
Press SELECT or DELETE.
There is a confirmation tone and the entry is
deleted. The following screen appears.
8
After a few seconds the display returns to the
Memory Store
You may select another number to delete (return
to step 4) or press MEMORY to return to standby.
4:42 PM Page 27
1
Press and hold MEMORY for about 3 seconds until the
display shows the memory screen and any stored
name/number. A beep sounds.
Memory Store
01 SANYO
02 Alison McNab
2
Press
to select the memory location you would like to delete.
Memory Store
01 SANYO
02 Alison McNab
3
Press SELECT.
The following screen appears with the memory location
number that you have selected in the display.
DELETE
Edit Memory02
Delete Memory02
Go Back
command line.
Yes
.
screen.
and , or enter a two-digit number (01– 20)
Edit Memory02
Delete Memory02
Go Back
Delete Memory02?
Yes
No
Memory02 Deleted
Memory Store
01 SANYO
02
E23