Erasing A Stored Name And Phone Number - Sanyo CLT-5810 Instruction Manual

UP015DH(CLT5810) ENG OM
DIRECTORY

Erasing a stored name and phone number

1
Press the MEM key in standby mode.
Select Memory
¨
2
Press the
(0 - 9) to select the memory location you would like to erase.
3
Press the MEM or SELECT key.
The name and phone number selected
appears with the memory location
number that you have selected in
the display.
4
Press the MEM or SELECT key again.
5
Press the
pointer down to ¨
6
Press the MEM or SELECT key. ¨
MemoryXX?
¨ appears.
7
Press the
Yes
pointer to ¨
8
Press the SELECT or DELETE/CH key.
You will hear a confirmation tone, and
MemoryXX Deleted
¨
9
After about 2 seconds, the display returns
to the Select Memory screen. You may
delete the information in another
memory location (return to step 2)
or press the END key to return to
standby mode.
3/9/05 10:37 AM
¨ is displayed.
VOL/RING or VOL/RING key, or enter a number
VOL/RING key to move the
Delete MemoryXX
¨.
Delete
VOL/RING key to move the
¨.
¨ appears.
Page 27
E27