Initial Programming; Language Setting; Area Code Setting; Ringer Tone - Sanyo CLT-U12 Instruction Manual

INITIAL PROGRAMMING

Before using this telephone, 4 initial settings must be completed on the handset:
Language, Area code (this is required to use Caller ID service from your tele-
phone company), Ringer tone, and Tone/Pulse setting.

Language setting

1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG until "
3. Press CID/VOL or
language.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.

Area code setting

For proper Caller ID operation, you must program your area code.
1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG repeatedly until "AREA CODE - - - " shows on screen.
3. Enter your 3-digit area code using the number keys. To change a digit, press
CH/DEL and then re-enter the number.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.

Ringer tone

1. Make sure the phone is OFF (not in TALK mode).
2. Press FLASH/PROG repeatedly until "RINGER TONE
3. Press CID/VOL or
ringer tone.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.

Tone/pulse setting

1. Make sure the phone is off (not in TALK mode).
2. Press FLASH/PROG repeatedly until "
screen.
3. Press CID/VOL or
or PULSE.
4. Press FLASH/PROG to store selection. You will hear a confirmation tone.
1 ENG 2 FRA 3 ESP " shows on screen.
, or the number keys (1 – 3) to select the desired
, or press the number keys 1-3 to select the desired
1TONE 2 PULSE " shows on
, or press the number keys 1-2 to select TONE
11
1" shows on screen.