Mounting The Base Unit On A Wall - Sanyo CLT-9950 Instruction Manual

All manuals and user guides at all-guides.com
CLT9950 2nd 6/19/00 4:10 PM
GETTING

Mounting the base unit on a wall

Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1
2 - 7
Page 11
STARTED
1
Attach the bottom bracket to the base as
shown. Make sure all tabs snap into the
notches on the base.
2
Plug the telephone line cord to the
TEL LINE jack and the AC adaptor to the
DC IN 9V jack.
3
Plug the telephone line cord into the
telephone outlet.
4
Fit the AC adaptor cord into the molded
channel. Then wrap the cord around the
strain relief notch.
5
Plug the AC adaptor into a standard
120-V AC wall outlet.
6
Raise the antenna to a vertical position.
7
Align the mounting slots on the base with the
mounting posts on the wall. Push in and
down until the phone is firmly seated.
E7