All manuals and user guides at all-guides.com
CLT2420 5th
6/21/00
1:57 PM
GETTING
Mounting the base unit on a wall
Standard wall plate mounting
This phone can be mounted on any standard telephone wall plate.
1
2 - 7
Page 11
STARTED
1
Attach the bottom bracket to the base as
shown. Make sure all tabs snap into the
notches on the base.
2
Plug the telephone line cord to the
TEL LINE jack and the small plug of the AC
adaptor to the DC IN 9V jack.
3
Plug the telephone line cord into the
telephone outlet.
4
Fit the AC adaptor cord into the molded
groove. Then wrap the cord around the strain
relief notch.
5
Plug the AC adaptor into a standard
120-V AC wall outlet.
6
Raise the antenna to a vertical position.
7
Align the mounting slots on the base with the
mounting posts on the wall. Push in and
down until the phone is firmly seated.
E7