Inventory - Grizzly G0750GV Owner's Manual

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE: If you cannot find an item on this list,
carefully check around/inside the machine and
packaging materials. Often, these items get lost in
packaging materials while unpacking or they are
pre-installed at the factory.
A
J
-16-

Inventory

Main Components (Figure 8)
A. Main Unit .................................................... 1
B. 6" Three-Jaw Chuck w/2-Piece Jaws ......... 1
C. Steady Rest ................................................ 1
D. Quick-Change Tool Post ............................ 1
E. Follow Rest ................................................. 1
F.
Backsplash ................................................. 1
G. Chip Tray .................................................... 1
H. Right Cabinet .............................................. 1
I.
Front Panel ................................................. 1
J.
Left Cabinet ................................................ 1
B C D E
I
Figure 8. Main components.
F
Model G0750GV (Mfd. Since 03/18)
Qty.
G
H