Inventory - Grizzly G0971 Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Wood Crate Inventory (Figure 4)
A. Electric Slip Roll ......................................... 1
Cardboard Box Inventory (Figure 5)
B. Control Pedestal ......................................... 1
C. Eye Bolt M8-1.25 x 72 ................................ 1
D. Hex Nuts M8-1.25 ....................................... 2
E. Flat Washers 8mm ..................................... 2
Support Arm w/Safety Cable ...................... 1
F.
G. Safety Cable Support Arms........................ 3
-12-
Figure 4. Wood crate inventory.
Qty
B
Qty
Figure 5. Cardboard box inventory.
A
C
D
E
G
Model G0971 (Mfd. Since 11/23)
F