Grizzly G0750GV Owner's Manual page 59

G4985—Machine Shop Practice-Vol. 1 - Book
G4986—Machine Shop Practice-Vol. 2 - Book
Karl Hans Moltrecht's two-volume work on metal-
working operations delivers the ultimate teaching
and reference tool for basic cutting operations,
layout work, lathe turning, drilling operations, taper
and angle turning, and boring work. Written to aid
the beginner as well as the experienced machinist
or engineer. Due to their nature, books are non-
returnable. Defective books will be replaced.
Figure 94. G4985 Machine Shop Practice Book.
H7617—Oil Can w/Flex Nozzle
This high-pressure oil can is perfect for lubricat-
ing the ball oilers found on your machine. Holds 5
ounces of oil.
Figure 95. H7617 Oil Can W/Flex Nozzle.
order online at
Model G0750GV (Mfd. Since 03/18)
www.grizzly.com
SBCE3450—How to Run a Lathe—English
First printed in 1907, this 56th edition is an exact
reprint from 1966. Well illustrated with vintage
photos and drawings, this 128-page book is writ-
ten specifically about the care and operation of a
metal lathe. "This book is to aid the beginner or
apprentice in the machine shop and the student
in the school shop to secure a better understand-
ing of the fundamental operations of modern lathe
practice in use in modern industries in the United
States."
Figure 96. How to Run a Lathe.
T10719—Crown Savers for .17 to .45 Caliber
Barrels (10 Pk.)
T10720—Crown Savers for .50 Caliber Barrels
(3 Pk.)
With crown savers you never have to recrown
the barrel when installing muzzle brakes or doing
any job requiring a center in the end of the barrel
crown.
Figure 97. T10720 Crown Savers.
1-800-523-4777
or call
-57-