Inventory - Grizzly G0842 Owner's Manual

inventory

the following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
if any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
inventory (figures 7–10)
A. lathe assembly
—headstock (mounted) ............................. 1
—tool rest Base (mounted) ...................... 1
—tool rest (mounted) ................................ 1
—tailstock (mounted) ................................. 1
a
figure 7. lathe assembly.
b. End Supports ............................................. 2
C. Stand legs (Front right/rear left) ............ 2
D. Stand legs (Front left/rear right) ............ 2
E. tool tray ..................................................... 1
B
figure 8. Stand components.
-14-
f. Copy attachment ........................................ 1
G. Copy attachment Safety Shield ................. 1
H. Faceplate 6" ............................................... 1
i. live Center Mt#2 ....................................... 1
J. Spur Center Mt#2 ...................................... 1
K. Flat Wrenches 32mm ................................. 2
L. Combo Wrench 22mm/24mm .................... 1
M. Knockout tool ............................................. 1
N. hex Wrenches 3, 4, 5, 6mm ..................1 Ea
O. Cutting tool ................................................ 1
P.
Copy attachment handles w/Jam nuts ...... 3
F
Qty
i
M
figure 9. loose inventory components.
Q. Carriage Bolts M8-1.25 x 16 (Stand) ........ 20
R. Flat Washers 8mm (Stand) ...................... 20
S. hex nuts M8-1.25 (Stand) ........................ 20
T. hex Bolts M8-1.25 x 16 (lathe/Stand) ....... 8
u. lock Washers 8mm (lathe/Stand) ............. 8
v. hex nuts M8-1.25 (lathe/Stand) ................ 8
Q
r
C
S
d
E
g
J
K
n
o
figure 10. inventory fasteners.
Model G0842 (Mfd. Since 04/18)
h
l
p
t
u
V