Mounting Procedure - Clearaudio Jubilee MM User Manual

Hide thumbs Also See for Jubilee MM:
Table of Contents

Advertisement

Available languages

Available languages

User manual / Bedienungsanleitung

1. Mounting procedure

1.
Always handle your cartridge with the protective stylus guard in place.
2.
Align the mounting holes of the headshell or tonearm with the holes in the cartridge.
3.
Attach tonearm wires to cartridge pins, being careful not to add too much force.
Also be sure proper channel and polarity is maintained.
4.
Insert the screws through the headshell holes and engage them to the inner threads of the
cartridge body. Please take care to not overtight them by force.
NOTE: Always try to use Clearaudio cartridge gold clips or damage may result on cartridge pins.
Left output (L+)
+
Left ground
R
L
Right output (R+)
-
Right ground
Pic. 1: Color marking of the signalpins
5.
Mount the headshell onto the tonearm (if not intergrated), and adjust the overhang as per
tonearm manufacturer's specifications and tighten cartridge mounting screws fully with the
accesssory screwdriver.
Take care that the cartridge is sitting flat and have a full contact to the headshell.
Please read these instructions carefully before attempting to connect or install your MM cartridge
to avoid any loss of warranty. There is a very high possibility of damaging your moving magnet
cartridge, while connecting or disconnecting to a preamplifier or phono-stage which is not properly
grounded.
If the ground of your preamplifier and ground of your tonearm and turntable are not connected
together, there could be a dangerous situation for your MM cartridge (which will be not covered
under warranty).
Therefore, be careful and follow instructions below:
1.
Connect tonearm turntable ground with preamplifier ground (before plugging in
the electrical power supply)
2.
Mount MM cartridge into the tonearm
3.
First plug the tonearm cable into the phono inputs an your preamplifier
4.
Preamplifier volume control must be placed fully down (position „ 0")
5.
Plug the main power cord into your electrical power supply
6.
Switch „ ON" your preamplifier
7.
Your MM-Cartridge is ready to play!
Keep calm and concentrated when adjusting the cartridge.
Damaged music reproduction or cartridge fault will never reproduce the one we love: MUSIC
Page 4
>>
white
>>
blue
>>
red
>>
green
© clearaudio electronic GmbH, 2018/10

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Essence mcConcept mc

Table of Contents