Using Abbreviated Dialing - Sanyo M1 Owner's Manual

To dial or save phone numbers with pauses:
1.
Enter the phone number.
2.
Select Options (right softkey) and select either Hard Pause or
2-Sec. Pause. (Hard pauses are displayed as a "P" and two-second
pauses as a "T.")
3.
Enter additional numbers.
4.
Press
– or –
Select Options (right softkey) > Save Phone# to save the number in
your Contacts.
When dialing a number with a hard pause, press TALK to send the next
Note:
set of numbers.

Using Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. It allows you to dial a number
by entering the last four or five digits of any number in your Contacts
directory.This feature becomes available when you enable Abbreviated
Dialing and program a five-or six- digit prefix you wish to use for abbreviated
dialing. (See "Setting Abbreviated Dialing" on page 68.)
To place a call using Abbreviated Dialing:
1.
Enter the last four or five digits of the prefix phone number.
2.
Press
If the digits match more than one entry,the Abbrev.Dial list will be displayed;
Note:
select the correct entry and press TALK again.
You can also place a call by selecting Options (right softkey) >
Tip:
Abbrev. Dial after step 1 above.
to dial the number.
.
Section 2A: Phone Basics 35