Selecting A Ringer Type For An Entry - Sanyo M1 Owner's Manual

Selecting a Ringer Type for an Entry

You can assign a ringer type to a Contacts entry so you can identify the caller
by the ringer type. (See "Ringer Types" on page 44.)
To select a ringer type for an entry:
1.
Display a Contacts entry.
2.
Select the entry for which you want to set the incoming ringer and
press
3.
Select a phone number, and then select Options (right softkey) >
Edit; or if you are selecting an item other than the phone number,
select Edit (right softkey).
4.
Scroll down to the box next to the
Ringer Type menu.
5.
Use your navigation key to scroll through available ringers. (When you
highlight a ringer type, a sample ringer will sound.)
6.
Highlight your desired ringer and press
7.
Select Save (left softkey) to save the new ringer type.
.
icon and press
.
Section 2F: Using Contacts
to display the
99