Table of Contents
Advertisement
Using Speed Dialing
With this feature, you can dial your favourite entries using one key
press for locations 2-9. (See "Assigning Speed Dial Numbers" on
page 65.)
To use speed dial for voice calls:
From standby mode, press and hold the appropriate key for
approximately two seconds.
– or –
From standby mode, press the appropriate key and
press
The display confirms that the number has been dialed when it shows
"Connecting...".
To use speed dial for Push 2 Talk calls:
From standby mode, press the appropriate key and press
(See "Assigning Speed Dialing for Push 2 Talk Entries" on
page 106.)
The display confirms that the number has been dialed when it shows
"P2T calling...".
Using Abbreviated Dialing
Abbreviated Dialing is another form of speed dialing. It allows you to
dial a number by entering the last 3-6 digits of any number in your
Contacts directory. This feature becomes available when you set the
abbreviated dialing enable. (See page 42 for the setting.)
To place a call using Abbreviated Dialing:
1.
Dial the last 3-6 digits of a contact's phone number.
2.
Press Options (right softkey) to display the dialing options.
3.
Highlight Abbrev. Dial and press
Note:
If there is no matched number, your phone dials the number you set for
abbreviated dial with the last four or five digits you entered. If there are matched
numbers in your Contacts list, the abbreviated dial list will be displayed. To place
a call, select a number and press
or
.
,
, or
.
.
.
21
Advertisement
Table of Contents
