Setting The Speakerphone For Ready Link Calls; Setting The Default View Of The Ready Link List; Setting The Floor Display Of The Ready Link Calls - Sanyo M1 Owner's Manual

Setting the Speakerphone for Ready Link Calls

You can set your phone to use speakerphone mode for Ready Link calls. By
default, the speakerphone is set to on.
To set the speakerphone mode:
Select
or Off.
If the phone's ringer volume is set to Vibrate All, Ringer off, or Silence All,
Note:
the speakerphone turns off. Press SPEAKER key to turn the
speakerphone mode on.

Setting the Default View of the Ready Link List

You can select the default Ready Link List when Ready Link is launched.
To select the default view of the Ready Link List:
1.
Select
setting is Personal List.)
2.
Select your desired list and press

Setting the Floor Display of the Ready Link Calls

With this feature, you can select the floor display during Ready Link calls.
To select the floor display:
1.
Select
2.
Select Text Only or Image 1–3 and press
182 Section 2J: Using Ready Link
> Settings > Ready Link > Speakerphone > On
> Settings > Ready Link > Default View. (The default
> Settings > Ready Link > Floor Display.
To see a display preview of the image, select Preview (right
softkey).
.
.