Accessing The Security Menu; Using Your Phone's Lock Feature - Sanyo M1 Owner's Manual

Accessing the Security Menu

All of your phone's security settings are available through the Security menu.
You must enter your lock code to view the Security menu.
To access the Security menu:
1.
Select
2.
Enter your lock code to display the Security menu.
If you can't recall your lock code, try using the last four digits of your
Tip:
wireless phone number or try 0000. If neither of these work, call
Qwest Wireless

Using Your Phone's Lock Feature

Locking Your Phone
When your phone is locked, you can only receive incoming calls or make
calls to 911 or special numbers. (See "Using Special Numbers" on page 74.)
To lock your phone:
1.
From the Security menu, select Lock Phone > Lock Now. (To set
your phone to lock the next time it is turned on, select On Power-up.)
2.
Select Full Lock or Excep. Incoming Calls and press
Unlocking Your Phone
To unlock your phone:
1.
From standby mode, select Unlock (left softkey).
2.
Enter your lock code.
> Settings > Security.
® Repair at 1-888-879-0611.
Section 2C: Setting Your Phone's Security
.
71