Using Abbreviated Dialing; Dialing From The Contacts List; Using Speed Dialing - Sanyo SCP2700 Operating Manual

Using Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use either of the following abbreviated
dialing features.
•
Contacts Match to retrieve any number saved in your Contacts by entering any three to
thirty-two digits of the number. (See "To activate the Contacts Match feature" on page 26.)
•
Prepend to prepend the first five or six digits (for example, the area code and prefix) to any
four or five digits you enter. (See "To activate the Prepend feature" on page 26.)
To place a call using Contacts Match feature:
1. Enter any three to thirty-two digits of a Contacts entry's phone number.
2. Press TALK.
To place a call using Prepend feature:
1. Enter the last four or five digits of the number.
2. Press TALK
Note: The Abbreviated Dial list appears when more than one matched numbers are found.
Highlight an entry and press TALK to place a call.

Dialing From the Contacts List

1. Press CONTACTS (right softkey).
- or -
Press MENU/OK > Contacts.
2. Highlight the entry you want to call and press TALK to dial the entry's default phone
number.
- or -
To dial another number from the entry, select the name and press MENU/OK, and then
select a number and press TALK.

Using Speed Dialing

You can dial up to 98 numbers with one or two key presses.
To use speed dial for locations 2-9:
► From standby mode, press and hold the appropriate location number for approximately two
seconds.
To use speed dial for locations 10-99:
► From standby mode, press the first digit, and then press and hold for approximately two
seconds, of the appropriate location number.
13